ISOCOAT 500

Description  An elastomeric , water proofing coating recommended for
coating on roof tiles , building façade , swimming pools and water reservoirs .

Advantages  1- Protects the buildings from weather conditions all year long.
2- Considerable sun ray reflection , so prevents raising
temperature of the buildings during summer .
3- ISOCOAT could be applied by roller as textured and
decorative finishing inside building entrances , kitchens and
bathrooms .
4- Applicable on different kinds of surfaces like wood ,
concrete , steel bricks and asbestos .
5- Due to its elasticity , it can withstand elongation up to five
times the original applied length which allow it to cover
building cracks up to 2 mm crack width .
6- ISOCOAT is a waterproofing paint and resistible to
diluted acids, alkalies , salts and sea water .
7- High resistance to UV rays .
8- ISOCOAT is a cold applied paint , which is available in
several colours

Technical date Density (gm/cm3) 1,3 - 1,35
Main Drying temperature 5oC
Temperature resistance -10- + 100oC
Shelf life at 20oC 12 months
Complies with ASTM D - 4887,D - 4541

Application  1- Stir well before use .
2- The surface must be clean and free of dust, dirt , grease or oil .
3- Dilute ISOCOAT by 50% water for the first coat .
4- Apply the second coat with 10% water dilution or without .
5- A layer of fiber glass or industrial textile could be installed between
the two coats as reinforcement .
Coverage 1 kg for 2-4 square meters according to the surface nature , number of
coatings and rate of dilution .
Packing 1 kg , 5 kg , 20 kg drums .