EUCOBET 300 VZ
Plasticizer with retarding effect
Description
EUCOBET 300 VZ is a plasticizer combined with a retarding effect .
Especially developed to place concrete at high ambient temperatures .
Main Purpose
To improve the effectiveness of the water content in concrete mixes to achieve increased workability without
loss in strength . For pumped, prestressed and structural concrete.
Because of the retarding effect; EUCOBET 300 VZ is the ideal plasticizer
for concrete to be placed in high temperatures.
Advantages
-Improves workability in hot climates.
-Easier and quicker placing and compaction.
-Increased strengths.
-Reduction of tendency for cracks due to shrinkage.
-Better cohesion.
-Therefore minimized segregation and bleeding .
Standards
Complies with BS 5057 1/1974
ASTM C-494 type A and D
DIN and SIA Standards .
Properties
Appearance liquid
Colour brown
Specific gravity 1,15
Chloride content nil
Air entraining less than 2% air is
Entrained at normal
dosage rate
Compatibility with cement all types of Portland
cement
Shelf life up to 2 years
Dosage
The optimum dosage should be determined by site
or laboratory tests with the actual concrete mix,
which enables the effect of workability, strength gain and/or cement reduction to be measured .
The rate of addition is generally in the range of : 0,2-0,5 % the cement weight
Retardation effect between 4-6 hours depending on
ambient temperature dosage, w/c ratio and type of cement used .
EUCOBET 300 VZ is added with the mixing water to the concrete
Packing
In drums of 200 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOBET 300 VZ.pdfEUCOBET 300
Plasticizer
Description
EUCOBET 300 is a plasticizing admixture that is used to produce concrete of high workability
Main Purpose
To produce high workability concrete without increasing water content.
The period during which the concrete can be placed is also extended .
May also be used to promote high early and ultimate strengths
by large water reduction whilst maintaining workability .
For pumped, pre stressed and structural concrete .
Advantages
-Increased workability speeds handling .
-Faster and cheaper compaction .
-Homogeneous concrete structure, less shrinkage.
-lower pumping pressure .
-Minimized bleeding and segregation .
-Retardation without loss in strength .
-Enables concrete to be placed at high ambient temperature .
Standards
Complies with BS 5075 1/1974
ASTM C - 494 type A
DIN and SIA Standards .
Properties
Appearance liquid
Colour brown
Specific gravity 1,2
Chloride content nil
Air entraining less than 2% air is
entrained at normal
dosage rate
Compatibility with cement all types of Portland
cement
Shelf life up to 2 years
Dosage
The optimum dosage should be determined based on
site conditions or laboratory tests with the particular concrete mix .
The rate of addition is generally in the range of :
0,2 - 0,5 % of the cement weight
EUCOPLAST 300 is added with the mixing water to the concrete
Packing
In drums of 200 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOBET 300.pdfEUCOBET BV
Plasticiser
Description
EUCOBET BV is a plasticising admixture used to
produce high workability concrete. Meanwhile it is used as a highly effective water reducing agent to promote high ultimate strength .
EUCOBET BV is especially developed to place concrete at high ambient temperatures, some slump maintenance and slight retardation.
Main Purpose
EUCOBET BV is used wherever high quality concrete is demanded under difficult placing and climate conditions i.e. it is used to flow concrete in :-
Floor slabs, roof decks, foundations and pavements .
(Rapid placing without vibration, high temp.)
- It maintains rapid pumping of concrete .
(High flowability)
-It helps in pouring concrete in areas with heavy
reinforcement and in poorly accessible areas .
Advantages
- Enables concrete to be placed at high ambient temperatures .
- Minimizes bleeding and segregation .
- Increases workability, speeds handling .
- Self compacting concrete that can be placed with a minimum effort .
- It reduces creep and shrinkage .
- EUCOBET BV is chloride-free; does not attack reinforcement .
Standards
Complies with BS 5075 1/1974
ASTM C - 494 type A
DIN and SIA standards .
Properties
Appearance liquid
Specific gravity 1,2
Chloride content nil
Air entraining less than 2% air is entrained
at normal dosage rate
Compatibility with cement all types of Portland
cement
Shelf life up to 2 years
Colour Brown
Dosage
The optimum dosage should be determined based on Site or laboratory tests of the particular concrete mix .
The rate of addition is generally in the range of ;
0,2 - 0,8 % of the cement weight .
0,1 - 0,4 liter per bag of 50 kg cement .
EUCOBET BV is added with the mixing water to the concrete .
Packing
20 Kg, 200 Kg drum
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOBET BV.pdfEUCOBET SUPER
Super Plasticiser
Description
EUCOBET SUPER is superplasticiser and a highly effective water reducing agent.
It has a dual action that promotes high workability concrete as well as the reduction of mixing water.
This plasticiser is based on selected ligno-sulphonates .
Main Purpose
As a super plasticiser it is used to flow concrete in :
-Floor slabs, roof-decks, foundations and pavements. (rapid placing without vibration.)
-It helps in Rapid pumping of concrete (high flow ability)
-It facilitates Pouring concrete in areas with heavy reinforcement
and in poorly accessible areas ( Bridges) .
Advantages
-It increases workability without increasing water.
-It accelerates hardening after setting.
-It provides concrete the capability to flow readily without segregation.
-It leads to a significant increase of ultimate strength.
-Self compacting concrete so we can place it with minimum effort .
-We can place concrete rapidly without vibration
-The EUCOBET SUPER reduces creep and shrinkage .
-EUCOBET SUPER decreases pumping pressure .
-Flowing concrete reduces pouring and its cost.
-It is chloride - free .
Standards
Complies with BS 5057 1/1974
ASTM C-494 types A and F .
DIN and SIA Standards .
Properties
Appearance liquid
Specific gravity 1.2
Chloride content nil
Air entraining less than 2% air is
entrained at
normal dosage rate
Compatibility with cement all types of
Portland cement
Shelf life up to 2 years
Colour Brown
Dosage
The optimum dosage should be determined by site or laboratory tests with the particular concrete mix .
The rate of addition is generally in the range of :
Packing
20 kg, 200 kg drums
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOBET SUPER.pdfEUCOBET VZ
Plasticiser with retarding effect
Description
EUCOBET VZ is used for the production of a highly
Effective plasticiser with a set-retarding effect for producing free-flowing concrete in hot climates .
Main Purpose
EUCOBET VZ is ideal for concrete, to be placed in high temperatures,
it is also used to produce high quality concrete under difficult placing conditions .
Advantages
-It provides the concrete with a long-lasting control of slump loss .
-EUCOBET VZ Improves workability without increasing mixing water .
-It gives concrete the capability to flow readily without segregation .
- EUCOBET VZ has a good retarding effect .
- It increases water tightness .
- EUCOBET VZ is Chloride - free .
- It reduces creep and shrinkage .
- Self leveling and requires little or no vibration during placing
Standards
Complies with BS 5057 1/1974
ASTM C-494 type A and D
DIN and SIA Standards .
Properties
Appearance liquid
Specific gravity 1,1
Chloride content nil
Air entraining less than 2% air is
entrained at
normal dosage rate .
Compatibility with cement all types of Portland
cement
Shelf life up to 2 years
Colour Brown
Retardation effect between 4-6 hours depending
on ambient temp.
dosage and W/C ratio .
Dosage
The optimum dosage should be determined based on site or laboratory tests with the actual concrete mix,
which enables the effects of workability, strength gain and/or cement reduction to be measured .
The rate of addition is generally in the range of :
0,2 - 0,5% of the cement weight
0,1 - 0,25 liter per bag of 50 kg cement .
Packing
20 , 200 kg drums .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOBET VZ.pdfEUCODUR
Accelerating concrete-mixture
Description
EUCODUR is an accelerating concrete admixture for use with every type of Portland cement.
It is guaranteed completely free of all forms of chloride .
Main Purpose
To accelerate the setting and early strength gain of Portland concrete and mortar mixes.
EUCODUR is also a plasticiser which, where required enables the w/c ratio to be
reduced whilst still maintaining workability. Such reduction can result in an
increases of ultimate and early strengths
Advantages
Composed to achieve high early strength .Can be used as
an alternative to high Alumna cement in precast work .
Standards
Complies with BS 5057 1/1974
ASTM C-494 type A and D
DIN and SIA Standards .
Properties
Appearance liquid
Specific gravity 1,15
Chloride content nil
Air entraining less than 2% air is
entrained at normal
dosage rate
Compatibility with cement all types of Portland cement
Shelf life up to 2 years .
Dosage
The optimum dosage should be determined by site or laboratory
tests with the particular concrete mix.
The rate of addition is generally in the range of :
1 - 5 % of the cement weight
0,5 - 2,5 liter per bag of 50 kg cement
Best results are obtained, when added into the mixer at the same time as the mixing water .
Packing
In 200 kg drums.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCODUR.pdfEUCO - FOAMING AGENT BASE SODIUM LAURITE
Foaming agent to produce light weight concrete
Description
EUCO-FOAMING AGENT is a chloride free foaming agent to produce light weight concrete by entraining a
controlled amount of air bubbles to the concrete mix
Main Purpose
EUCO-FOAMING AGENT is
used to promote foam in the concrete mix and the mortar used in :-
-Cast in-place for a unit of low cost terrace houses and bungalows. in lightweight bricks or blocks for high-rise buildings.
- In panels and partition walls of various dimensions either pre- cast or poured in place.
-In all types of insulation works, including cavity walls.
-In roofing and ceiling panels. in sound proofing application.
-In pre-cast / in-place exterior wall facades for all sizes of buildings.
-In foundations for roads and sidewalks.
-In sub-surface for sport areas, e.g. tennis courts.
-In infill sections between beams of suspended floors.
-In aircraft arresting beds. road crash barriers.
-In explosion-resistant structure. highway sound barriers.
-In floating barge, jetties, floating homes, and slope protection.
-In Roofs to produce light weight thermal and acoustic insulation layer .
-In Brick factories for the production of light weight blocks .
-In Light weight reinforced structural concrete elements such as light weight concrete used to fill the voids around the under grounds body and under water structures .
Advantages
- High thermal and acoustic insulation .
- Wide choice of concrete densities .
- Fire proof .
- Roofing Insulation
For many years, Euco foaming agent has been
supplied for roofing insulating in the Middle East. A low density mix is chosen and the resulting air content gives the material excellent thermal insulation properties. The low density also has the advantage that it does not significantly add to the overall weight of the roof.
Roofing is probably the most widespread application of foamed concrete. Foamed concrete has two benefits when it is used for roofing. The first benefit is that it provides a high degree of thermal insulation. The second benefit is that it can be used to lay a flat roof to falls, i.e. to provide a slope for drainage. In countries where roofs are flat and where roof surfaces are used as part of everyday life, foamed concrete is strong enough to support foot or even vehicular traffic on the roof. Foamed concrete is also much lighter than slopes made from mortar screeds. This means that a roof with a slope made of foamed concrete imposes a lower loading on the structure of the building,
Wall Construction
Eucofoaming agent can be used for cast in situ walls. These can be made either by using traditional shuttering or hollow polystyrene moulds. This provides a quick and cheap method of building, with the added advantage of excellent thermal insulation. A wall made from 1200kg/m³ density foamed concrete provides the same level of thermal insulation as would a wall made from dense concrete that was 5 times as thick and made from 10 times the quantity of materials as the foamed concrete wall.
Floor Construction
Eucofoaming agent provides very good material for floor construction. It is ideal for building sub-floors quickly and cheaply and can be used for leveling terrain and raising floor levels as well as for insulation purposes.
Properties
Appearance liquid
Colour transparent
Specific gravity 1,01
Viscosity 6,5 MPA
Chloride content nil
Compatibility with cement all types of Portland
cement
Shelf life up to 2 years
Surface tension 41,9 N/cm2
ASTM C 233
Dosage
The optimum dosage should be determined by site or laboratory tests with the particular concrete mix, which enables the effects of workability, amount of air entrained and also concrete strength, gain to be measured.
EUCO FOAMING AGENT dosage differs according to the density needed for the light weight concrete and to the type of aggregates used It is recommended to use the compressor after adding Euco foaming agent to the mixing water .
Test Results
Type |
Density kg/m3 |
Purpose |
Strength N/mm2 |
heat conduction factor W/ mk |
E 400 E 800 E 1000 E 1200 E 1350 E 1600 |
Approx 400 approx. 800 approx. 1000 approx. 1200 approx. 1350 approx. 1600 |
insulation insulation insulation leveling leveling subgrade/encasement |
---------- 1.0 - 2.0 1.5 - 2.5 2.0 - 3.0 2.0 - 3.5 3.0 - 6.0 |
0.10 0.28 0.35 0.47 0.55 0.74
|
Type |
Wet density kg/L |
cement kg |
sand 0-4 mm kg |
water approx. L |
foam L |
Euco Foaming Agent gram |
E 400 E 800 E 1000 E 1200 E 1350 E 1600 |
400 0.85 1.06 1.27 1.42 1.66 |
350 300 300 300 300 300 |
50 400 590 800 940 1180 |
140 100 110 130 140 160 |
650 560 480 380 320 210 |
700 520 440 350 300 195
|
"K" Value for light weight foam concrete produced with Euco Foaming Agent.
Density T/m3 |
Lambda2 |
K-Value 5 cm |
K-Value 10 cm |
K-Value 15 cm |
K-Value 20 cm |
K-Value 25 cm |
0.4 0.6 0.8 1.0 1.2 1.4 1.6 |
0.09 0.13 0.17 0.23 0.33 0.4 0.44 |
1.32 1,71 2.02 2.39 2,84 3,07 3.19 |
0.76 1,03 1,26 1,57 1,99 2,22 2.34 |
0,53 0,74 0,92 1,17 1,53 1,74 1,85 |
0,41 0,57 0,72 0,93 1,24 1,43 1,53 |
0,33 0,47 0,60 0,77 1,04 1,21 1,30
|
Packing
5,20, 200 kg .
Shelf life
up to 1 years
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOfomaing egent.pdfAntifrost admixture for concrete
Description
EUCOGEL is an Antifrost admixture based on selected raw materials to allow to place concrete in severely cold weather .
.
Main Purpose
EUCOGEL gives protection against the classical frost damages where the free water in the concrete freezes resulting ice pressure breaks the concrete apart and disturbs the normal hydration .
Advantages
EUCOGEL lowers the freezing point of mixing water and accelerates setting of cement .It gives protection to concrete of min. . 20 cm thickness against frost damages down to-10oc .
EUCOGEL contains no chlorides .
Standards
Complies with DIN and SIA Standards .
Properties
Appearance liquid
Specific gravity 1,15
Chloride content nil
Air entraining less than 25% at normal
dosage range
Compatibility with cement all types of Portland
cement
Shelf life up to 2 years
Dosage
The optimum dosage should be determined by site or laboratory tests with the particular concrete mix .
The rate of addition is generally in the range of :
1,0 - 2,0 % of the cement weight
0,5 - 1,0 liter per bag of 50 kg cement
EUCOGEL is added with the mixing water to the concrete
Remarks
EUCOGEL does not under any circumstances replace
good winter concreting practice. The concrete must be protected against cooling, and especially against wind. In order that EUCOGEL can exert its influence, the concrete after compaction must have a temperature of at least 5oC .
A concrete can be regarded as safe against frost, when it has reached a strength of approx. .80 kg/cm2. After reaching this level, a concrete, although frozen and therefore not increasing in strength, will not suffer any frost damage. As soon as the temperature rises, the hardening process will start up again .
Packing
In drums of 200 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOGEL.pdfEUCOLENT
Retarder for concrete
Description
EUCOLENT is a retarder for concrete to increase the setting time and maintain workability .
Main Purpose
To retard the setting of concrete to allow concreting under conditions of high ambient temperatures and
placing of larger volumes of concrete without joints. For pumped, prestressed and structural concrete .
Advantages
Prevents cracks in concrete in cases where the form-work deforms, eliminates cold joints. After the initial retardation the rate of hardening proceeds at a rate equivalent to or greater than that of normal concrete .Delivery of concrete can be made over long distances from a ready-mixed concrete plant .
Standards
Complies with BS 5057 1/1974
ASTM C-494 type A and D
DIN and SIA Standards .
Properties
Appearance liquid
Specific 1,06
Chloride content nil
Air entraining less than 2 %
Compatibility with cement all types of Portland
cement
Shelf life up to 2 years
Over dosing increase of the setting time
Proportional to the dosage
Dosage
The effect of EUCOLENT depends on a number of factors such as cement type, ambient temperature and mix design . The optimal dosage should be determined by site or laboratory tests with the given circumstances. As a guide to these trials a dosage is recommended between :-
0,1 - 3,0% of the cement weight
0.05 - 1,5 liter per bag of 50 kg cement
EUCOLENT should be added to concrete mix during the mixing process at the same time as the mixing water.
Packing
In drums of 200 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOLENT.pdfEUCOPLAST 100 VZ
Superplasticiser combined with a retarding effect
Description
EUCOPLAST 100 VZ is a synthetic based superplasticiser combined with a retarding effect .
Main Purpose
To produce high workability concrete which is virtually self leveling and requires little or no vibration during placing .May also be used to achieve high early strength .
Because of the retarding effect, a good workability can be maintained. For pumped, pre stressed and structural concrete .
Advantages
Increases workability :
-Speeds handling,
-Filling of form work and placing around congested reinforcement.
-Needs little or no vibration to achieve the optimum compaction .
-High early strength.
-Reduces shrinkage cracking by lowering W/C ratio.
-Lowers pumping pressures.
-Prevents clogging .
-Minimizes bleeding and segregation
Standards
Complies with BS 5057 1/1974
ASTM C-494 type A and D
DIN and SIA Standards .
Properties
Appearance liquid
Specific gravity 1,1
Chloride content nil
Air entraining does not entrain air
Compatibility with cement all types of Portland
cement
Shelf life up to 2 years
Dosage
The optimum dosage should be determined based on
site conditions or laboratory tests with the particular concrete mix, this dose should enables the effects of workability, strength gain and/or cement reduction so it has to be measured accurately .
The rate of addition is generally in the range of :
0,8 - 1,5 % of the cement weight
0,4 - 0,75 liter per 50 kg of cement EUCOPLAST 100 VZ is added with the mixing water to the concrete .
Packing
In drums of 20, 200 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOPLAST 100 VZ.pdfEUCOPLAST 100
Superplasticiser and flowing concrete admixture
Description
EUCOPLAST 100 is a synthetic superplasticiser for the production of free flowing concrete and a water reducing agent to promote high early and ultimate strength .
Main Purpose
EUCOPLAST 100 is used to produce high workability concrete which is virtually self leveling and requires
little or no vibration during placing may also be used to promote high early and ultimate strengths by large water reduction whilst maintaining workability .
Its plasticising effect is particularly useful where :-
- Maximum performance is required .(concrete elements manufactured in precast factories where rapid demolding and required ) .
- Placing condition are difficult .
- Where poor quality aggregates are found .
- Pre-cast elements are produced .
- Bridges (high early strengths) .
.
Advantages
- Increases workability ; handing .
- Filling of form work and placing around congested reinforcement .
- Higher strength .
- Little or no vibration to achieve optimum compaction .
- Reduces shrinkage cracking by lowering W/C ratio .
- Low pumping pressures .
- Minimizes clogging .
- Minimizes bleeding and segregation .
- Early removal of scaffolding .
- Does not entrain air .
- Chloride - free .
Standards
Complies with BS 5057 1/1974
ASTM C-494 type E and F
DIN and SIA Standards .
Properties
Appearance liquid
Specific-gravity 1,1
Chloride content nil
Air entraining does not entrain air
Compatibility with cement all types of
Portland cement
Shelf life up to 2 years
Colour Brown
Dosage
The optimum dosage should be determined based on
site conditions on laboratory test with the particular
concrete mix, which enables the effects of workability,
strength gain and/ cement reduction to be measured accurately .
Superplasticiser and flowing concrete admixture
The rate of addition is generally in the range of ;
0,8 - 1,5 % of the cement weight .
0,4 - 0,75 kg per 50 kg of cement
EUCOPLAST 100 is added with the mixing water to the concrete
Packing
20 kg , 200 kg drums .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOPLAST 100.pdfEUCOPLAST 200 VZ
Superplasticiser combined with a retarding effect
Description
EUCOPLAST 200 VZ is a synthetic based super plasticiser with a retarding effect .
Main Purpose
EUCOPLAST 200 VZ is used to promote good workability for a long period due to retarding effects. As any plasticiser it requires little or no vibration during placing
Uses
- High concrete temp .
- Ready mix concrete .
- Long transport distances
- Fair face concrete .
Advantages
EUCOPLAST 200 VZ provides the following properties :-
- Long-lasting control of slump loss at high ambient temp .
- Increases setting time in hot weather .
- Accelerates hardening after setting .
- Reduces water without loss of workability .
- Reduces shrinkage and creep .
- Chloride-free .
- Prevents clogging .
- Higher early and ultimate strength .
Standards
Complies with BS 5075 1/1974
ASTM C-494 types G
DIN and SIA Standards .
Properties
Appearance liquid
Specific gravity 1,1
Chloride content nil
Air entraining does not entrain air
Compatibility with cement all types of Portland
cement
Shelf life up to 2 years
Dosage
The optimum dosage should be determined based on site conditions or laboratory tests with the particular concrete mix, which enables the effects of workability, strength gain and/or cement reduction to be measured accurately .
The rate of addition is generally in the range of :
0,4 - 1,6 % of the cement weight
0,2 - 0,8 liter per 50 kg of cement
EUCOPLAST 200 VZ is added with the mixing water to the concrete.
Packing
In drums of 200 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOPLAST 200 VZ.pdfEUCOPLAST 200
Superplasticiser and flowing concrete admixture
Description
EUCOPLAST 200 is a synthetic-polymer-based product .
Main Purpose
Eucoplast200 is used as a powerful concrete plasticiser to produce high workability concrete in hot weather which is virtually self leveling and requires little or no vibration during placing .EUCOPLAST 200 may also be used to promote high early and ultimate strengths by large water reduction whilst maintaining workability for:-
- Fair faced concrete .
- Ready mix concrete .
- Difficult placing conditions .
- Long transport distances .
- High concrete temperature .
Advantages
-Achieves high workability and high strength in hot weather by long-lasting control of slump loss at high concrete temperature .
-Speeds handling , filling of form work , and placing around congested reinforcement .
-Requires little or no vibration , to achieve optimum compaction .
-Reduces shrinkage cracking by lowering W/C ratio .
-Lowers pumping pressures .
-Prevents clogging .
-Minimizes bleeding and segregation .
-Increases setting time in hot weather .
-Chloride free and does not attack reinforcement .
Standards
Complies with BS 5075 1/1974
ASTM C-494 type F
Properties
Appearance liquid
Specific-gravity 1,2
Chloride content nil
Air entraining does not entrain air
Compatibility with cement all types of Portland
cement
Shelf life up to 2 years
Dosage
The optimum dosage should be determined by site or laboratory tests with the particular concrete mix, which enables the effects of workability, strength gain and/or cement reduction to be measured accurately .
The rate of addition is generally in the range of :-
0,4 - 1,6 % of the cement weight
0,2 - 0,8 liter per 50 kg of cement
EUCOPLAST 200 is added with mixing water to the concrete .
Packing
In drums of 200 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOPLAST 200.pdfEUCOPOR S 15
Air entraining admixture
Description
EUCOPOR S 15 is an air-entraining agent based on neutralized vinsol resin to produce microscopic air bubbles evenly distributed throughout the concrete.
Main Purpose
To increase the durability and quality of the concrete for roadways, bridges, motor ways, aircraft runways, dams e.g. Also for other large areas of concrete where damages by frost and salt action or shrinkage cracking is likely, or where poor aggregate or sand grading have to be used .
Advantages
Improves workability, increases compaction. Reduces segregation and bleeding even when poor aggregate or sand grading have to be used .
Standards
Complies with ASTM C 260
BS 5075 : part 2
DIN and SIA Standards
Properties
Appearance liquid
Specific gravity 1,06
Chloride content nil
Air entraining depending on dosage
Compatibility with cement all types of Portland
cement.
Shelf life up to 2 years
Dosage
The optimum dosage should be determined by site or laboratory tests with the particular concrete mix by measuring the air content .
The rate of addition is generally in the range of :
0,1 - 0,2 % of the cement weight
0,05 - 0,1 liter per bag of 50 kg cement
Remarks
Depending on the requirements, the quantity of entrained air should be between 3 and 8% . It is necessary to have these values constantly supervised and the dosage adapted during work if necessary .
Packing
In drums of 200 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOPOR S 15.pdfEUCOTAN DM
Integral waterproofing agent
Description
EUCOTAN DM is a synthetic plasticiser, blended with selected ligno sulfonates to produce a highly workable, waterproof concrete.
Main Purpose
To improve the effectiveness of water content in concrete mix to achieve increased workability without
loss of strength. For pumped, pre stressed and structural watertight concrete .
Advantages
Produced to achieve a watertight concrete by improving the impermeability of concrete . Improves workability with less water. Faster and cheaper compaction. Homogeneous concrete structure, less shrinkage and minimized bleeding and segregation .
Standards
Complies with BS 5075 1/1974
ASTM C-494 type A
DIN and SIA Standards .
Properties
Appearance liquid
Specific gravity 1,04
Chloride content nil
Air entraining less than 2% air is
entrained at normal
dosage rate
Compatibility with cement all types of Portland
cement.
Shelf life up to 2 years
Dosage
The optimum dosage should be determined by site or
laboratory tests with the actual concrete mix .
The rate of addition is generally in the range of :
0,5 % of the cement weight .
0,25 liter per bag of 50 kg cement .
EUCOTAN DM is added with the mixing water to the concrete .
Packing
In drums containing 20 kg & 200 kg .
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCOTAN DM.pdf