EPOXY PUTTY
EPOXY RESIN PUTTY
Description
Solvent free, two component expoxy resin putty contains special fine filler.
Main Purpose
-For filling up cracks.
-For filling up cavities.
-For leveling uneven concrete.
-For grouting joints between tiles.
-For preparation of surfaces before epoxy paints.
Product characteristics
Epoxy Putty is a thixotropic product, accordingly it is
easy to work with it on walls and on roofs.
Adheres also on iron, wood, masonry, ceramics and epoxy .
Therefore Epoxy Putty can be used also to bond the above mentioned
materials together .After hardening Epoxy Putty gives a high mechanical
strength and a tough elastic character.
Technical Date
Viscosity at 20ºC cps Thixotropic
Mix ratio by weight 19:2
Specific weight at 20ºC (g/cm3) approx. 1.7
Pot life at 10oC (hours). 6
Pot life at 20oC (hours). 2
Pot life at 30oC (hours). 1
Min. hardening temperature oC +10
Walkable at 20oC (hours) 24
Thorough hardened at 20oC (days) 7
Re-workable (hours) 12-24
Adhesion to concrete concrete fracture
Storage life in months at 20oC 12
Colour white
Complies with ASTM C-881-78, ASTM C-579-75
Surface preparation
Cement bound surface must br dry, firm, offer good traction, be free from grout, dust and dirt and additionally free of oil, grease and other impurities which can adversely affect uniform adhesion. If considered necessary, the surface should be sand blasted, flame scaled, milled or ground.
Application
It is recommended to use spatula, steel trowel or putty tools.
Note: On steel or for very high adhesion of the Epoxy Putty we recommend to prime first with Euxit 50.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EPOXY PUTTY.pdfEUCO FLOORTOP
INDUSTRIAL FLOORING SYSTEM
Description
EUCO-FLOPOORT is an industrial flooring system designed for use in the most server conditions. It is resistant to corrosive and oxidizing chemicals with high abrasion resistance, compressive and tensile strength. Heavy traffic , continuous soaking in water, salts, oil, organic and inorganic acids, alkalis and many solvents have little effect on durability.
Main purpose
As high resistant antislip flooring in breweries, bakeries,canneries, chemical factories, dairies, flour mills, hospitals, kitchens, garages, parking, schools, shops, warehouses etc.
Advantages
- antislip
- waterproof
- resistant to acids and alkalis
- high compressive and flexural strength
- impact resistant for example; it’s used for the front wall of the squash court.
- abrasion resistant
- good freeze - thaw resistant
- not harmed by continuous soaking of grease, oil and water
- high bond strength and low shrinkage
- low maintenance
- easy installation
Composition
EUCO FLOORTOP is a two component product.
EUCO FLOORTOP P (powder) is a powder component with selected, specifically graduated aggregates and pigments.
EUCO FLOORTOP L (liquid) is a special developed liquid component to be used in combination with EUCO FLOORTOP P.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUCO FLOORTOP.pdfEUXIT 200
MORTAR BASED ON EPOXY RESIN
SLIP AND CHEMICAL RESISTANCE
Description
Solvent free three component mortar based on epoxy resin.
Fields of application
EUXIT 200 has a wide range of application for:
- New buildings .
- Floor maintenance in industries e.g.
EUXIT 200 gives on old and new concrete floors a very hard surface which is slip resistant -and has a very high chemical resistance.
Therefore EUXIT 200 is recommended for :
- Laboratories
- Chemical plants
- Aircraft hangars
- Metal finishing plants
- Carparks
Product characteristics
After hardening EUXIT 200 gives a very high strength and a very high resistance to impact and abrasion.
EUXIT 200 is resistant to spillage of chemicals commonly met within industry, including petrol, fuel oils, alcohol, paraffin, aliphatic hydro-carbons.
EUXIT 200 is weather resistant and nearly free of yellowing .
EUXIT 200 is stable to constant temperatures and temperature changes in the range from - 30oC to + 70oC heat.Floors made by EUXIT 200 can be cleaned by steam jet
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 200.pdfEUXIT 210
FLOW-MORTAR
Description
Solvent free, three compo nent flow-mortar on epoxy resin
Main purpose
- For the grouting of bearing plates, machine bases, crane runways and bridge abutments.
- For Fixing bolts anchors and reinforcement.
Product characteri -stics
EUXIT 210 contains special selected resin, hardener and mineral aggregate which give EUXIT 210 a high fluidity. EUXIT 210 hardens without shrinkage and is resistant to high mechanical loads and to a wide range of aggressive chemicals.
Technical data
Specific weight (g/cm3) approx. 1,8
Pot life at 10oC (hours) 1.8
Pot life at 20oC (hours) 2
Pot life at 30oC (hours) 1
Min. hardening temperature (oC) 8
Thorough hardened at 20oC (days) 7
Compressive strength (N/mm2) 80-100
Bending property (N/mm2) approx. 30
Adhesion to concrete concrete fracture
E-module (N/mm2) approx. 104
Storage life in months at 20oC 6
Complies with ASTM D 2240
C-1181, C-579, D-531, D-543, C-580, C-307, C-884
Surface preparation
Cement bound surfaces must be dry, firm, offer,good traction, and be free from grout, dust and dirt particles, and additionally be free from oil, grease and other impurities which can adversely affect uniform adhesion. If considered necessary, the surface should be sand blasted, flame scaled or ground.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 210.pdfEUXIT 220
Description
Solvent free two component epoxy adhesive mortar.
Main purpose
- For fixing light-shafts.
- For fixing structure elements made of concrete, steel and wood .
- For repairing edges of stairs ...... etc. .
- For repairing bridge-trusses .
Product characterstics
EUXIT 220 is a thixotropic product, accordingly it is easy to work - with it .on walls and on roofs.
EUXIT 220 adheres on concrete, steel and wood. Therefore EUXIT 220 can be used also to bound the above mentioned materials together.
EUXIT 220 is weather resistant and nearly free of yellowing.
EUXIT 220 is high resistant to a wide range of aggressive chemicals commonly used in industry.
EUXIT 220 is unaffected by constant temperatures and temperature changes in the range from -30o to + 100oC dry heat and up to + 50oC wet heat. For short periods the product can withstand temperatures up to 50% higher.
EUXIT 220 can be cleaned by steam jet.
Technical data
Viscosity at 20oC cps thixotopic
Mix ratio by volume 2 : 1
Mix ratio by weight 2 : 1
Specific weight at 20oC (g/cm3) 1,8
Pot life at 10oC (hours) 2 1/2
Pot life at 20oC (hours) 1 1/2
Pot life at 30oC (hours) 3/4
Min. hardening temperature (oC) +8
Walkable at 20oC (hours) 24
Thorough hardened at 20oC (days) 7
Re-workable (hours) 12-24
Compression strength (N/mm2) 90
Bending property (N/mm2) 35
Thermal expansion oC-1 45 x 10-6
Adhesion to concrete concrete fracture
Storage life in months at 20oC 6
Colour Gray
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 220.pdfEUXIT 222
EPOXY RESIN PUTTY
Description
Solvent free, two component epoxy resin putty.
Main purpose
- For filling up cracks.- For filling up cavities.
- For repairing edges of stairs .
- For leveling uneven concrete, for fixing light stressed parts.
- For fixing steel reinforcement into old concrete while repairing R.C.structures.
Product Characteri-Stics
EUXIT 222 is a thixotropic product, accordingly it is easy to work with it on walls and on roofs. Adheres also on iron, wood, masonry, ceramics, epoxy and on eternity .Therefore
EUXIT 222 can be used also to bond the above mentioned materials together. After hardening
EUXIT 222 gives a high mechanical strength and a tough elastic character.
EUXIT 222 is high resistant to a wide range of aggressive chemicals commonly used in industry.
Technical data
Viscosity at 20oC cps thixotropic
Mix ratio by weight 19 : 1
Specific weight at 20oC (g/cm3) approx. 1,7
Pot life at 10oC (hours) 6
Pot life at 20oC (hours) 2
Pot life at 30oC (hours) 1
Min. hardening temperature (oC) + 8
Walkable at 20oC (hours) 24
Thorough hardened at 20oC (days) 7
Re-workable (hours) 12-24
Compression strength (N/mm2) 60
Bending property (N/mm2) 30
E-module at 20oC (N/mm2) 7500
Adhesion to concrete concrete fracture
Storage life in months at 20oC 6
Colour Gray
Complies with ASTM C-881-78, ASTM C-579-75
Surface preparation
Cement bound surfaces must be dry, firm, offer good traction, be free from grout, dust and dirt and additionally free of oil, grease and other impurities which can adversely affect uniform adhesion. If considered necessary, the surface should be sand blasted, flame scaled, milled or ground.Iron and steel must be free of rust scales and should be free from oil, dust , grease and other dirt particles. The best method of preparation is to flame scale or sand blast.
Application
It is recommended to use steel spatula and steel trowel.
Note:
On steel or for very high adhesion of the EUXIT 222 putty we recommend to prime first with EUXIT 50 or EUXIT 55.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 222.pdfEUXIT 230
SELF LEVELING FLOOR TOPPING
Description
Solvent free, pigmented, two component, self-leveling epoxy flooring.
Fields of application
Abrasion and chemically resistant flooring for cement bound surfaces, such as concrete, floor plaster, asbestos cement, and also for iron and steel.
The main fields of application are floors in dairies, slaughter houses, textile factories, chemical plants, battery plants, power-stations, offices and public buildings industry ....... etc. .
Product Characteri-stics
EUXIT 230 when properly hardened is very hard and has high resistance to abrasion. It is waterproof, waste and sea-waterproof and shows resistance to alkalis, diluted acids, saline solutions, mineral oils and aliphatic hydrocarbons.
EUXIT 230 is particularly free of yellowing.
EUXIT 230 is unaffected by constant temperatures and temperature changes in the range from -30o to +90o C dry heat and up to 40oC wet heat. For short periods the product can withstand temperatures 20-30% higher. EUXIT 230 can be cleaned by steam jet.
Technical data
Mix ratio (by weight) 16 : 1
Mix ratio (by volume) 8,75 : 1
Pot life at 10oC (hours) 2
Pot life at 20oC (hours) 1
Pot life at 30oC (hours) 1/2
Minimum hardening temperature (oC) 8
Bone dry at 20oC (hours) 6
Walkable at 20oC (hours) 24
Thorough hardened at 20oC (days) 7
Re-workable at 20oC (hours) 8-24Volume shrinkage (%) 1
Linear shrinkage (%) 0,1
Pencil hardness 2 H
Erichsen indentation (mm) 1
Adhesion to concrete after storage
at temperature changes concrete-fracture
E-module (N/mm2) 7500
Compression strength (N/mm2) approx. 60
Bending property (N/mm2) approx. 30
Storage life in months at 20oC 12
Complies with ASTM D 2240, ASTM D 2047, BS 6319
Surface preparation
Cement bound surfaces must be dry, firm, offer good traction,be free from grout, dust and dirt and additionally free of oil, grease and other impurities which can adversely affect uniform adhesion. If considered necessary, the surface should be sand blasted, flame scaled, milled or ground.
Application
Procedure for cement bound surfaces:
Thin smooth coating:
-Prime with EUXIT 50 or EUXIT 55 Material consumption, depending on absorbency of the surface:200-400 g/m2.
-On the next day apply the top coating of EUXIT 230 with a spatula or squeegee to the required coating thickness (min. 2-3 mm), then roll with a spiked roller to remove all air and at the same time level off consumption2-3 liters per m2
-If a especial non-slip surface is desired, immediately sprinkle the paving mixture with sand 0,7 - 1,2 mm approx.
Container
EUXIT 230 is supplied in drums of 5 liters, 10 liters and 20 sizes and liters.Resin and hardener are supplied in correct mix ratios.
colour 102 Light gray 703 Light green
121 Dark gray 705 Dark green
201 Beige 800 White
302 Brick red Other colours are available
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 230.pdfEUXIT 300
ACRYLIC RESIN QUICK MORTAR
Description
Ready to use two component quick mortar on acrylic resin base.
Fields of apationplic
EUXIT 300 is a ready to use quick mortar especially for repair work of concrete, runways, concrete roads........ etc. ..
Product characteri-stics
After hardened EUXIT 300 gives a very high strength and a very high resistance to impact and abrasion.
EUXIT 300 is weather resistant and free of yellowing.
Technical data
Specific gravity 2,0
Pot life 10oC 30 min.
Pot life 20oC 25 min.
pot life 30oC 20 min.
Min. hardening temperature - 10oC
Thorough hardened 60 min. /90 N/mm2
Volume shrinkage % 3
Linear shrinkage % 0,07
Compression N/mm2 90
Bending property N/mm2 35
Adhesion on concrete concrete fracture
Storage life in months at 20oC 6
Surface
Cement bound surfaces must by dry, firm, offer good traction
preparation
and be free from grout, dust and dirt particles, and additionally free of oil grease and other impurities which can adversely affect uniform adhesion. If considered necessary the surface should be sand blasted, flame scaled, faced or ground.
Application
Processing for repair work :
-Impregnation of the surface with EUXIT 301 a liquid acrylic-resin.
- Pouring of EUXIT 300 .
- If you have a mortar thickness more than 10 cm mix EUXIT 300 with clean, dry gravel or work in different layers.
Container Size and colour
Packing: 5 x 1 liter
Colour : Gray
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 300.pdfACRYLIC RESIN QUICK MORTAR
Description
Two component acrylic resin
Main purpose
EUXIT 301 is an impregnation resin for concrete under
EUXIT 300 quick-mortar.
Product characteristics
After proper hardening EUXIT 301 shows good resistance to acids, alcalyes and chemical solvents and is free of yellowing.
Technical data
Viscosity at 20oC cps 10 - 30
Specific gravity 1,0
Hardening time (hours) 20oC 2
Flash point 10
Surface preparation
Cement bound surfaces must be dry, firm. Offer good traction, and be free from grout, dust and dirt particles, and additionally be free from oil, grease and other impurities which can adversely affect uniform adhesion. If considered necessary, the surface should be sand blasted. Flame scaled or ground.
Application
EUXIT 301 is applied by roller or brush.
Container Size & Colour
Packing : 1 x 1 liter
Colour : Colourless.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 301.pdfEUXIT 302
ACRYLIC RESIN FOR NORMAL AND COLOURED MORTAR
Description
Solvent free two-component acrylic resin formulated with a peroxide hardener.
Main purpose
EUXIT 302 has a wide range of application for
- Flooring of new buildings.
- Floor maintenance.
- Repair edges of stairs ........ etc. .
- Repair bridges and concrete roads.
- Repair walls and machine basements ....... etc. .
- Repair of runways.
Product characterstics
EUXIT 302 gives , whether filled with our non-pigmented filler or with our pigmented filler, very high early strength. As the chemical reaction starts already at -10oC, these advantage can be used for instance for repair-work in cool stores.
EUXIT 302 is free of yellowing and shows a very good resistance to acids, alkalis and chemical solvents.
Technical data
EUXIT 302 EUXIT 302
Gray or coloured mortar ratio EUXIT 302/ filler 1:6.
Approx. depending on filler .
Viscosity at 20oC/cps 80-100 ---
Specific Gravity at 20oC (g/cm3) 1,0 2,0
Potlife at 20oC min. 15 15
Minimum hardening temperature -10oC -10oC
Compressive strength/2 h N/mm2 --- 50-60
Compressive strength/2 days N/mm2 39 130-150
Tensile bending property N/mm2 16 35-40
Tensile strength N/mm2 5 ---
Volume shrinkage % 12 0,3
Linear shrinkage % 1,0 ---
Adhesion on concrete concrete concrete
fracture fracture
Flash point oC + 10 ---
Colour colourless gray or
other colour
Storage life in months at 20oC 12 ---
Surface Preparation
Cement bound surfaces must be dry, firm, offer good traction, and be free from grout, dust and dirt particles, and additionally free from of oil, grease and other impurities which can adversely affect uniform adhesion. If considered necessary, the surface should be sandblasted, flame-scaled, milled or ground.
Application
EUXIT 302 is supplied in correct mix ratio (resin/hardener).
Hardener must be thoroughly mixed with the resin. Please consult our technical leaflet with the mixing instructions.
If a mortar has to be made, mix first the resin and hardener and then add filler up to the desired consistency. Mix well resin and filler by using a drilling machine.
EUXIT 302 can be filled up with filler up to a ratio (weight) of 1:6 the applied mortar has to be protected from humidity for 6-8 hours, otherwise the colour of the mortar surface may change to white or the surface may not harden thoroughly.
EUXIT 302 mortar can be applied by trowel.
Container Sizes
Containers of 5 kg / 10 kg / 25 kg / 200 kg available.
container sizes and colour of EUXIT 302 filler Filler in bags 25 kg; standard colour gray for other please contact our sales service.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 302.pdfEUXIT 309
ACRYLIC MORTAR
Description
Solvent free two-component acrylic mortar formulated with a peroxide hardener .
Fields of application
EUXIT 309 has a wide range of application for
- Flooring of new buildings.
- Floor maintenance in industries e.g.
EUXIT 309 gives on old and new concrete floors a very hard surface which is slip and very high chemical resistant.In addition EUXIT 309 is nearly free of yellowing and withstands wet conditions.
EUXIT 309 is recommended for:
- Slaughter houses .
- Cool stores .
- Laboratories.
- Aircraft hangars.
- Car parks.
- Food factories
Product characteristics
EUXIT 309 gives a very high strength. High early strength can be achieved also in cool stores as the chemical reaction starts already at - 10oC.
EUXIT 309 shows very good resistance to acids, alkalis and chemical solvents. It adheres also with iron and steel.
Technical data
Specific gravity at 20oC g/cm3 2,0
Potlife at 20oC min. 15
Minimum hardening temperature -10oCCompressive strength /2H N/mm2 50-60Compressive strength/2 days N/mm2 130-150
Tensile bending property N/mm2 35-40
Volume shrinkage % 0,3
Adhesion on concrete concrete fracture
Colour Gray or other
Surface preparation
Cement bound surfaces must be dry, firm, offer good traction and be free from grout, dust and dirt particles, and additionally, be free of oil, grease and other impurities which can adversely affect uniform adhesion. If considered necessary, the surface should be sandblasted, flame-scaled or ground .
Application
EUXIT 309 is supplied in correct mix, resin and hardener/filler. The resin has to be added to the hardener/filler and must be thoroughly mixed. Please
consult our technical leaflet with the mixing instructions.
The applied mortar has to be protected from humidity for 6-8 hours, otherwise the colour of the mortar surface may change to white or the surface may not thorough harden. EUXIT 309 can be applied by trowel.
Important : To achieve a proper adhesion we recommend to prime the concrete first with EUXIT 301.
Container sizes and colour
EUXIT 309 is supplied in containers of
1 Lt. , 10 Lt.
Gray For other colour please contact our sales service.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 309.pdfEUXIT 310
ACRYLIC FLOW-MORTAR
Description
Solvent free two component acrylic flow-mortar formulated with a peroxide hardener.
Main purpose
- For the grouting of bearing plates.
- For the grouting of machine bases.
- For the grouting of crane-runways, bridge abutments.
- For fixing bolts and anchors and reinforcement.
Product characteristics
EUXIT 310 gives very soon a high strength even on temperatures of -10oC. These advantages can be used for instance for repair work in cool stores.
Technical data
Specific weight (g/cm3) 2,0
Pot life at 20oC min. 10
Pot life at 10oC min. 20
Pot life at 0oC min. 40
Pot life at -10oC min. 75
Min. hardening temperature oC -10
Compression strength at 20oC
after 2 hours N/mm2 50-60
after 2 hours N/mm2 130-150
Bending property N/mm2 35-40
Volume shrinkage in % 0,3
Storage life in months at 20oC 6
Surface preparation
Cement bound surfaces must be dry, firm, offer good traction, and be free from grout, dust and dirt particles, and additionally be free from oil, grease and other impurities which can adversely affect uniform adhesion. If considered necessary, the surface should be sand blasted, flame scaled, or ground.
Application
Depending on the problem the form-work has be to absolutely leak proof.
For casting the EUXIT 310 care must be taken that all the air is removed out of the admixture.
Big voids can be repaired with EUXIT 310 as follows:
- Fill in the voids dry crushed rocks or gravel approx. 15-30 mm .
- After that , fill continuously the EUXIT 310 over the gravel or crushed rock into the voids.
The advantages of this procedure are:
- Less tension because of less reaction temperature.
- Less material consumption.
Container
EUXIT 310 is supplied in containers of 5 liters
Sizes and Colour
Resin and hardener are supplied in correct mix ratios.
Colour : Gray.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 310.pdfEUXIT 451
ACRYLIC FLOW-MORTAR
Description
A solvent contains colourless one component preparation on base of Alkoxysilan.
Main purpose
EUXIT 451 is used to impregnate and to seal cement bound surfaces as a hydrophobic impregnation. To impregnate concrete, plaster, concrete, roads, concrete parking areas, aircraft hangars, industrial floors, petrol stations, terraces and balconies..
Product characteristics
EUXIT 451 has an extremely low viscosity. Because of its high capillary action it forces itself deeply into the foundation material and fills all pores and capillaries. Cement bound surfaces are thereby hydrophobe and sealed against damp, water and water solvent substances. The penetration of steam is impeded, but however, is not completely prevented. The impregnated surfaces are hardened and become resistant to the effects of frost-tha wsalt.
Technical data
Specific gravity at 20oC (g/cm3) 0,8
Solvents Ethanol
Colour Colourless
Shelf life in months at 20oC min. 12
Storage well closed, cool
Precautions flammable liquid
Surface preparation and application
EUXIT 451 can be sprayed with an airless-gun, applied by roller or brushed on. The surface should be clean and dry to allow a good penetration.
Consumption
Depending on the absorbency of the concrete-surface approx. 200-400 g/m2.The total amount should be applied in 1-3 coatings with intervals of about 15 minutes between each (wet on wet).
Container Sizes and colour
EUXIT 451 is supplied in containers of 25 liters and 200 liters.
Colour : colourless
Precautions
Skin contamination should be immediately cleaned with soap and water. It is recommended, that rubber gloves and glasses be worn whilst working.
This product contains solvents. Therefore when working in enclosed places, good ventilation must be provided . Do not smoke and don't expose to open flames .
Typical Impregnated with Without treatmentwith
results EUXIT 451 EUXIT 451
Diffusion resistant factor 106 120
Vapor resistance (h/m) 1,32 1,50
Water absorbing property 0,017 0,761
(kg/m2/h) 0,057 0,471
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 451.pdfEUXIT 455
ANTI-GRAFFITI PROTECTION COAT
Description
EUXIT 455 is a ready to use, solvent containing one component preparation to impregnate and to seal cement based surface and natural stones.
Main purpose
EUXIT 455 is used to impregnate and to seal cement bound surfaces and natural stones as a hydrophobe impregnation. It is specially used to protect buildings, monuments, metro-stations, railway-stations a.s.o. against painting by vandals. EUXIT 455 is an "Antigraffiti coat". Such painting can easily be removed by washing the surface .
Product characteristics
EUXIT 455 has an extremely low viscosity. Because of his high capillary action it forces itself deeply into the foundation material and fills all pores and capillaries. The surfaces are thereby hydrophobe and sealed against paint, sprayed or brushed on.
Technical data
Specific gravity 1,3
Flash point over 50oC
Solvent trichlorethane
Colour colourless
Storage well closed, cool
Precautions flammable
Application data
EUXIT 455 can be applied with roller, brush or by spray equipment.The surface must be dry, clean and free of dust, oil etc. EUXIT 455 is invisible, but due to the adsorption of the substrate a small colour change may occur (we recommend to test the colour change).The fresh painted surface should be protected against rain for 24 hours.As EUXIT 455 contains solvents, when working in closed places good ventilation must be provided. Do not smoke and no open flame.Skin contamination should be immediately cleaned with soap and water. It is recommended, that rubber gloves and glasses be worn whilst working.The solvents of EUXIT 455 may dissolve bitumen, sealant, paints .....etc. Therefore joints, paints etc. has to be protected while EUXIT 455 is applied.
Consumption
Depending on absorbency of the substrate:
Concrete 300-400 g/m2
Normal stone 300-600 g/m2
The total amount should be applied in one coat without intervals, so that a continuous penetration is given (wet on wet).
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 455.pdfEUXIT 500
CLEANER
Description
Mixture of organic-chloride-solvents.
Main Purpose
To clean all tools which has been used to work
with EUXIT resin products.
Product characteristics
EUXIT 500 is a flammable organic cleaner. Hardener and not hardened epoxy and acrylic-resins can be dissolved with EUXIT 500.
Instruction for use
Tools which has been not immediately cleaned can be put for 12-24 hours in EUXIT 500. After this procedure has been done for use brush the rest of resin together with EUXIT 500 of F.
Remarks
EUXIT 500 is flammable !
Container sizes
Packing : 1x 5 litters.
Physiological Reactions and precautions
EUXIT 500 is caustic. Therefore it is absolutely essential that the skin does not come into contact with the hardener. It is recommended that rubber gloves be worn whilst working. Skin contamination should be immediately cleaned with soap and plenty of water, better still with an addition of 2% household vinegar. If splashed into the eyes, they should immediately be washed with plenty of water. By means of an eye bath with boric acid, (obtainable from chemists and pharmacies) rinse out, and then report immediately to an eye specialist. At all times local statutory safety regulations with regard to working with epoxy hardeners and the handling of solvents should be strictly observed.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 500.pdfEUXIT 501
THINNER FOR EUXIT-PRODUCTS
Description
Mixture of organic-chloride-solvents.
Main purpose
EUXIT 501 is a special thinner for EUXIT products.
Product characteristics
EUXIT 501 reduces the viscosity of EUXIT products.
There for the advantages are:
- Easy to brush .
- Easy to roll .
- Easy to spray .
- Better penetration into the concrete therefore better adhesion of EUXIT 80 .
Instructions for use
EUXIT 501 can be given directly to the final mixture of EUXIT products (component I + component II ) or separate to component I and component II.Mixing EUXIT 501 to EUXIT products we recommend to use a drilling or boring machine with a whirl. While adding the EUXIT 501 the speed of the machine should be approx. 300 r.p.m.
Remarks
EUXIT 501 is flammable!
Container sizes
Packing 1 x 5 liters
Physiological reactions and precautions
EUXIT 501 is caustic. There fore it is absolutely essential that the skin does not come into contact with the hardener. It is recommended that rubber gloves be worn whilst working. Skin contamination should be immediately cleaned with soap and plenty of water, better still with an addition of 2 % household vinegar. If splashed into the eyes, they should immediately be washed with plenty of water. By means of an eye bath with boric acid, (obtainable from chemists and pharmacies) rinse out, and then report immediately to an eye specialist. At all times local statutory safety regulations with regard to working with epoxy hardeners and the handling of solvents should be strictly observed.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT 501.pdfEUXIT TB 50
ELASTIC COATING MATERIAL
FOR CONC., ASPHALT, IRON, STEEL & TIMBER
Description
A solvent free, two component preparation on tar-polyurethane base (Poly-mixture with iscoyanate hardener).
Fields of application
EUXIT TB 50 is a very elastic coating material for concrete, asphalt, iron and steel timber, especially for coating roadways and floors such as, for example, steel surfaced roads, temporary roadways, mastic asphalt roads, industrial asphalt floors, wooden bridges and similar constructions.
Especially suitable for re-conditioning and repair of asphalt roads and bridges.
Properties
When properly hardened EUXIT TB 50 is a tough, highly elastic product, and is highly resistant to abrasion and is non-skid. It is resistant to diluted chemicals and saline solutions and also to aliphatic hydrocarbons, petrol, heating oil, brake-fluids and similar substances. EUXIT TB 50 can withstand constant temperatures in region of minus 30 to plus 100o C dry heat, and up to plus 60oC wet heat.
Technical data
Viscosity 8 mm Din at 20oC (sec) 60 - 80
Specific gravity at 20oC (g/m3) 1,2
Mix ratio (by weight) 5 : 1
Mix ratio (by volume) 5 : 1
Pot life at 10oC (hours) 1,5
Pot life at 20oC (hours) 3/4
Pot life at 30oC (hours) 1/4
Minimum hardening temperature (C) 3
Bone dry at 20oC (hours) 2
Walkable at 20oC (hours) 24
Thorough hardened at 20C (aft.days) 4
Water absorption aft. 21 days at 23oC
a) Regul. test: 50x50x1 mm (weight %) 0,6
b) Din. 53472 test: 50x50x4 mm (weight %) 0,15
Weight loss aft. 28 days at 60°C
a) test thickness: 0,3 mm (weight %) 7,5
b) test thickness: 4 mm (weight %) 0,8
Volume shrinkage (%) 4
Linear shrinkage (%) 0,3
Shore A hardness 70
E-module approx. 50 kp/cm3
max. joint movement (%) 3-5
Instructions for use
EUXIT TB 50 is supplied in correct mix ratios. The
hardener (com.B) is poured into the base component A care must be taken to ensure that the hardener is completely emptied from its container.
Mixing of the two components is best effective by means of a mechanical stirrer at a max. of 300 r.p.m. (a slowly revolving boring machine fitted with a whirl). Mix thoroughly! Ensure that at the sides and on the base the hardener is uniformly distributed in all directions. The mixture must be stirred until it becomes homogenous. The temperature of both components should be 10-20 oC when mixing together. The material must not be applied directly from the original storage container: After mixing, the product should be poured into a shallower container and again carefully mixed.
EUXIT TB 50 can be applied by roller, brushed on, or applied by dented spatula ,squeegee or wiper blade. To remove air bubbles, the surface should be gone over with a spiked roller.
Surface preparation
Cement bound surfaces must be dry, firm, offer good traction , be free from grout, dust and dirt, and. Additionally, by free of oil, grease and other impurities which can adversely affect uniform adhesion. If necessary, the surface should be sand blasted, flame scaled, milled or ground.
Iron and steel must be free of rust and scale and should be free from oil, dust, grease and other impurities which can adversely affect uniform adhesion.
Best surface-preparation is flame-scaling or sand-blasting.
Asphalt must be firm, dry, free of loose particles, free of dust, oil and grease.
In addition, 75% of the aggregate (granulation) should lay free on the top surface. If necessary, mill or blast.
1- Coating procedure for cement bound surfaces.
Surface coating compound, smooth or non-skid, for coating thickness of 2-4 mm .
1.1 Prepare surfaces as above .
1.2 Prime with EUXIT TB 50
Material consumption, depending on surface absorption, 200-400 g/m2.
1.3 Immediately after applying the primer, sprinkle with fire dried quartz sand 0,2-0,7 mm micron.
Consumption of sprinkled granulation, approx. 1,5 kg/m2.
1.4 After an interval of 1 day, apply the surface coating compound, which should comprise of :
1 part (volume) EUXIT TB 50
1,5 parts (volume) fire dried quartz and 0,2-0,7 mm
micron thoroughly mix the EUXIT TB 50 (components A and B), then immediately stir in the sand .Pour the mixture and spread to required thickness with a dented spatula or squeegee, and then roll with a spiked roller to
eliminate air bubbles and level off.
Material consumption 600 g EUXIT TB 50 50/m2and mm thickness.
1.5 If a non-skid surface is required, immediately sprinkle with the fire dried quartz sand 0,7-1,2 mm micron.
Consumption of granulation approx. 4 kg/m2.
2- Coating procedure for iron and steel.
2.1 Sand blast according to rost 2.213 (optimum peak to valley depth
approx. 50) .
2.2 Prime with EUXIT TB 50 .
Material consumption. approx. 300-500 g/m2, depending on
temperature.
2.3 If further work cannot be undertaken within 5 hours, then the fresh primer should be sprinkled with fire dried quartz sand 0,2-0,7 mm.
Consumption of sprinkled granulation 2 kg/m2.
2.4 1-5 hours after applying the primer, or alternatively 24 hours after
sprinkling with sand, apply the surface coating compound which should comprise of the following:-
1 part (volume) EUXIT TB 50 .
1 part (volume) fire dried quartz sand 0,2-0,7 mm micron
1/2 part (volume) calculated bauxite 1-3 mm.
This material should be applied to a thickness of approx. 4 mm.
Material consumption, approx. 2 kg EUXIT TB 50 /m2.
2.5 Immediately after applying the surface coating compound ,
sprinkle with calcinated bauxite 1 - 3 mm or 2 - 5 mm micron after sprinkling , it is worth while to roll in the bauxite with a light roll .
3- Coating procedure for asphalt.
3.1 Coating to improve the traction of asphalt roads .
3.1.1 Prepare surface as above.
3.2.2 Prime with EUXIT TB 50 .
Material consumption approx. 400 g/m2.
3.2.3 If further work cannot be undertaken within 5 hours,
immediately sprinkle the freshly applied primer with fire dried quartz sand, granulation 0,2 -0,7 mm Consumption of sprinkled granule,
1,5-2 kg/m2.
3.2.4 1-5 hours after applying the primer, or 24 hours after the sand
has been sprinkled, apply the surface coating compound, which should comprise of the following:-
1 part (volume) EUXIT TB 50 .
1 part (volume) fire dried quartz sand 0,2-0,7 mm micron and
1/2 part (volume) calcinated bauxite 1-3 mm or fire gravel 1-3 mm
micron. This material should be applied to a coating thickness of app.
4-5 mm. Material consumption, approx. 2 kg EUXIT TB 50 /m2.
3.2.5 Immediately after applying the surface coating, sprinkle with calcinated bauxite 1-3 mm or 2-5 mm or alternatively fine gravel 1-3 mm or 2-5 mm micron.
3.2.5 Immediately after applying the surface coating compound, sprinkle with calcinated bauxite 1-3 mm or 2-5 mm micron.
After sprinkling, it is worth while to roll in the bauxite with a light
roller. For track re-conditioning and coating over 1 cm it is worth
while to apply the surface coating compound in two coatings, whereby
the first surface coating compound should be made up of:-
1 part (volume) EUXIT TB 50 .
1 part (volume) fire dried quartz sand 0,2-0,7 mm.
1-2 parts (volume) fine gravel 2-5 mm to be added.
The above described fine mortar should be applied on top of this
coarse surface compound .
Cleaning and appliances
All tools and appliances should be thoroughly washed and cleaned
with Tools EUXIT TB 50 universal thinner immediately after use!
Physiological reactions and precautions in use
After proper hardening EUXIT TB 50 physiologically harmless. As a
tar containing product, however, it is not permitted to be used for component B (hardener) contains isocyanate and is caustic. Care must be taken so that the hardener does not come into contact with the skin, especially not with the eyes and mucous membranes. It is
recommended that rubber gloves be worn whilst working. Skin contamination should be immediately cleaned with soap and plenty of water, better still with an addition of 2% household vinegar.
If splashed into the eyes. They should immediately be washed with plenty of water. By means of an eye bath with boric acid, (obtainable from chemists and pharmacies), rinse out, and then report immediately to an eye specialist. At all times local statutory safety regulations with regard to working with epoxy hardeners should be strictly observed.
Container sizes and col. shades
EUXIT TB 50 is supplied in containers of 5 kg and 12 kg. Resin and
hardener are supplied in correct mix ratio
Color : Black.
Storage
Both components of EUXIT TB 50 are separately packed have a storage life of at least 12 months. After longer periods of storage, reactibility can decrease. Store in a cool and dry place!
The foregoing information is based on our own research and practical experience and is intended to be guidance to the end user. The information is compiled from scientific findings. We recommend that a check be made to a certain that this product is suitable for use under existing local conditions, and if necessary, a test coating should be made. We cannot be held liable for consequences deriving from this technical specification.
Our general conditions of supply and terms of payment are applicable.
Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below
EUXIT TB 50.pdf