EUCO BOND S 1

WOOD ADHESIVE

 

Description 

EUCO BOND is an emulsion adhesive based on P.V.A. and other additives to increase strength and elasticity.

A strong adhesive for wood, furniture and wooden floorings.

 

Advantages   

1-Ready to use, no additives or filler materials are required.

2-Strong adhesion, resists all weathering conditions, water and diluted chemicals.

3-Can be used as a patching mortar after mixing with cement to repair the concrete floors before fixing wooden floorings.

4-Economical and leaves no colour on wood after drying out .

5-EUCO BOND sticks and dries in suitable time.

 

Application 

1- For wood and furniture

- Surface must be thoroughly clean and free from.

- Dust, water, oil ..... etc.

- Apply EUCO BOND on the surface and press the two parts together without heating.

                       

2- For wooden floorings

- Surface must be clean as mentioned above.

-Apply a medium coat of the adhesive on the surface by brush .

-Directly fix the wooden flooring and leave it until complete drying.

- Clean the tools with aromatic solvent.

 

Consumption

1-1.5 kgs for 1 square meter .

 

Packing 

1-5-20-100 kgs container size.

 

 

 

 

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCO BOND S 1.pdf

Eucocoat super

Emulsion paint

 

Description  

Eucocoat super is a plastic math, anti rub, alkali resistant and non yellowing paint.

 

Field s of Application: 

Eucocoat super is used for interior uses, on old pre- plastered walls and concrete, and as under coat for wall paper.

 

Technical Data:

Finish 

Flat

Solids by volume

34%

Solids by weight

53%

Spreading

0.50 m²/kg (50 m dry)

Dry film thickness

50   Microns.

Wet film thickness

148 Microns.

Recommended D.F.T

150 Microns.

Specific gravity

1.4 gm/cm³

Thinner

Tap water.

Drying time

 

Surface

5 hr (at 25 oC. 60% R.H)

Full cured

7 days (at 25 oC. 60% R.H)

Recoat interval

 

Min

1-2 hrs (at 25 oC. 60% R.H)

Max

No limitation

Shelf life

Up to 1 year.

                       

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Application methods  

- By Brush and roller:

- Volume of thinner                :0-10%.

 

Mode of Application :      

Eucocoat Super must be stirred thoroughly before use method of application depends on type of surface:

1- Porous surfaces like new, old non treated walls, and ceilings , should be primed with diluted Eucocoat Supper then it is reduced to normal brushing as top coat .

2- Non porous surfaces like old.

walls and wood which have previously been painted with an oil painted should first be washed with a solution  of ammonia and  them painted with  Eucocoat Supper reduced to the normal consistency

 

Packing     

Drums 5 Kg , 20 Kg.

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

Euco coat super.pdf

EUCO COAT

Water emulsion paint with acrylic base

 

 

Description 

It is a plastic emulsion paint for walls and ceiling it is used on concrete, plaster, masonry, and all other emulsion paints.

 

 

Properties     

-Good adhesion to all surfaces.

-Excellent durability.

 

Technical      

Sp. Gravity                             1.76±0.2

Visc. At 25 Cº                         38±3 sec/8mm

Solids by weight                     69±1%

Colour                                     as required by customer

Drying time

Touch dry                               20 to 30 min at 25ºC

Through hardened                  7 days

Thinner                                   Tap water

Rate of application                 5-8 m2/coat

Shelf life                                 2 years

 

 

 

Application

-Surface has to be clean, dry free from loose material, oil and grease.

-Apply primer coat diluted with 15% water.

 -Apply 2nd coat after 2-3 hours according to ambient temp after diluted with water 10%.

-Apply 2rd coat as the 2nd coat.

 

Package  

1 kg, 5 kg, 20 kg.

 

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCO COAT.pdf

EUCO P.V.A. 50

 

Description   

Is medium viscosity polyvinyl acetate used primarily as an adhesive for wood parquet tile. It has flexibility and excellent tack.

To make it suitable for lying wood tiles, it exhibits high water resistance when used and it retains its adhesion even at constant exposure to varying humidity.

 

Physical  Properties   

Open time                               20-30 minutes

Appearance                             clear

When used

Flexibility                               good

Moisture                                 good

Storage life                             one year

 

Application  

Is easy to apply; pour sufficient amount on the concrete surface and spread roughly with stiff brush or a toothed trowel apply enough adhesive to the surface which can be covered within specified open time of the adhesive to attain maximum wetting of the tiles surface. After use, bush trowels, glue bath and other equipment should be washed clean with thinner before the adhesive dries.

 

 

Surface preparation

Surface to be applied must be dry and clean, free from   dust and loose materials to attain maximum adhesive must be shaken stirred before use.

Storage         

Keep containers closed when not in use. Use thinner to clean tools of excess adhesive.

 

Consumption

1 to 1.5 kg/m2

Package      

1 kg, 4 kg, 20 kg, 100 kg drums.

 

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCO P.V.A.pdf

 

EUCO QUARTZ

INTERIOR AND EXTERIOR TEXTURED QUARTZ PAINT

 

Description   

EUCO QUARTZ is a decorative exterior and interior coating which is a carefully controlled blend of fillers, fine, medium or coarse quartz particles, resins and pigments dispersed in a specifically formulated flexible emulsion. EUCO QUARTZ may be applied with a special roller to produce a varying degree of textured finish or with a paint brush for a smooth finish.

However a plastering machine will spray the material at a faster rate which is ideal for use in commercial buildings, town houses, or ware houses.

 

 

Properties   

1- Gives a decorative finishing for facade, building entrance ... etc.

2- Resists different weathering conditions, UV rays for several years.

3- Covers cracks up to 1 mm.

4- Could be applied directly on concrete, bricks, wood surfaces and plastering.

5- Available in white and other stable colour.

6- It is ready to use with no other additives.

7- Easy to use and can be applied with many application possibilities

 

Application  

1- Preparation : all surfaces to which EUCO QUARTZ is to be applied must be sound. Remove all loose and unsound materials fill cracks with standard filler and allow to dry.

2- Application. : EUCO QUARTZ is applied one coat using the following procedure:

1- If the surface is very porous apply. EUCO QUARTZ before painting.

2- Stir well before use.

3- Spread EUCO QUARTZ on to the surface by using roller, brush or steel spatula.

4- The degree of texture will be dependent on the roller design and according to the kind of roller (wool, cotton, sponge) .

5- The roller should be well coated, but not over loaded, as this could cause dropping or spillage.

 

Consumption

1-2 kg/m2depends on grain size and required thickness.

Shelf life                     two years

EUCO QUARTZ       is available in three grades

Fine                             application by roller, spray or brush

Medium                      application by roller or spatula.

Coarse                         application

Package                       25-30 kgs drums.

 

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCO QUARTZ.pdf

EUCO TILE GROUT

 

Description   

A material used as grout for ceramic and mosaic tiles to caulk joints as well as provides an attractive view .

 

Advantages   

1- It is distinguished for its high strength and easy application.

2- Is water proof.

3- It resists acids, alkalis and diluted salts.

4-It is economic in expenses.

5-Is available in several colours (red-blue-green-black-white).

 

Uses      

Necessary in hotel bathrooms and cuisine’s, restaurants, houses, hospitals and clubs.

 

 

Technical  Date    

Complies with ANSS A-118.6

 

Application 

The powder should be well mixed with mixing solution in a ratio of 3 powder to 1 mixing solution (1:3 Eucocolle to water), then, the joints should be filled either in floors or walls. After one to two hours, the area surrounding the joints should be wiped with a sponge or a wet towel. Then, it is left to dry.

 

Package 

5 kg-20 kg.

 

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCO TILE GROUT.pdf

Euco Top Mosaic

 

Composition :

Euco Top Mosaic is a blend of Portland cement, resins and additives for form improvement.

 

Description:

Euco Top Mosaic is a Mosaic and ceramic tiles adhesive for thin & thick bed fixing on all interior & exterior surface; i.e. it binds both Mosaic and ceramic tiles to sound plaster, cement, other masonry surfaces and surfaces exposed to permanently wet conditions.

 

Advantages:

  1. Euco Top Mosaic is not affected by weathering conditions, water, chemicals & heat.
  2. Economic in use with respect to other kinds of adhesives.
  3. High adhesive binds strength.
  4. Maybe used to tile directly onto glazed tile surfaces.
  5. When used in water tanks and swimming pools add EucoColle to attain waterproofing.

 

Standards:

BS 5980 Type 1 class AA

BS 5385 Part ANSI 118-1

 

 

Application :

  1. The surface to be tiled should be clean and free from dust. A stiff brush should be used to remove dusty or friable material, remove grease, oil , ..etc. with suitable detergent.
  2. Mix Euco Top Mosaic by water to form a thick creamy consistency 3 Euco Top Mosaic : 1 water approx.
  3. Porous surface should be painted by Eucotop 1 Euco Top Mosaic: 1 water.
  4. The mortar should be left after mixing about 10 min before applying on surface.
  5. Apply Euco Top Mosaic adhesive mortar to a depth of 3 mm with a notched trowel before fixing tiles immediately.
  6. Fix tiles by pressing into place, beginning at the bottom in the case of wall tiles, make sure that the back of each tile is not less than 75% in contact with the adhesive with a dam cloth.

 

Consumption:

Solid bed fixing 3-6 mm depth 4-8 kg/m²

Notched trowel smooth surface 2 kg/m²

 

Properties:

 

Shelf life

One year

Appearance

Powder

Specific gravity

2±0.02 gm/cm³

Color

Gray

Adhesive strength,

Dry storage

 

Ca.0.9-1.2 N/mm²

Adhesive strength,

Freeze /thaw

 

Ca.0.5 N/mm²

Adhesive strength,

Wet storage

 

Ca.0.8 N/mm²

Deformation

Flexible

Embedding time /skin formation

20 min

Thixotropy /non slip

Very high

Water resistance

Extreme wetness

Packing

Bag 20 kgs.

 

 

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

Euco Top Mosaic.pdf

EUCO TOP POWDER

FIXING POWDER FOR CERAMIC TILES

 

Description 

EUCO TOP powder is a blend of Portland cement, resin and Additives for form improvement.

EUCO TOP is used to fix ceramic tiles on all interior and exterior surfaces; i.e. it bounds ceramic tiles to sound plaster, cement, and other masonry surfaces. The surface to be tiled should be clean and free from dust. A stiff brush should be used to remove dusty or friable material remove grease, oil,...etc. With suitable, detergent. Complies with BS 5980 type 1 .

 

Advantages  

1- Is not affected by weathering conditions, water, chemicals & heat.

2-Economic in use with, appropriate expenses in comparison with other kinds of adhesives.

 

 

 

Application

1- Clean surface as mentioned before.

2-Mix EUCOTOP powder, with water, to form a thick creamy consistency. EUCOTOP : 1 water.

3- Porous surfaces should be painted by EUCOTOP;1 EUCOTOP : 1 water.

4- The mortar should be left after mixing about 10 min. before applying on surface.

5- Apply EUCOTOP adhesive mortar to a depth of 3 mm with a notched trowel before fixing tiles immediately.

6- Fix tiles by pressing into place, beginning at the bottom in the case of wall tiles make sure that the back of each tile is not less than 75% in contact with the adhesive.

 

Consumption

1 to 2 kg/m2.

Shelf life                     one year .

 

 

 

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCO TOP POWDER.pdf
EUCO TOP PUTTY

 

       Ready Mix Ceramic Adhesive Putty

 

 

Description 

Acrylic based ready mix adhesion of ceramic tiles.

 

Applications

Eucotop Putty is used for the adhesion of ceramic tiles on to different types of surfaces (rough and sumooth) such as: Cement plaster, Gypsum boards, painted walls, brick walls and is also used to adhere Ceramic tiles on to old tiles.

 

Advantages 

Eucotop Putty can be used to adhere marble tiles and stones on to walls and floors.

Eucotop putty is ready to use putty without adding any other materials and can be applied directly with notched trowel to about 2-3 mm to have a good adhesion and form a water proof layer under tiles as in swimming pools.

Euoc Top Putty can be used to adhere tiles onto exteror as well as interior surfaces.

 

 

Technical Data 

Appearance                             Putty

Specific Gravity                                 1.60

Colour                                     White

Resistance to high temperature          Up to 120ºC

Consumption                          1.5-200 kg/m2

Shelf life                                 one year under good storage conditions

 

Surface Preparation

Surface must be free from dirt: grease or any other matters and should be leveled .

In case of gypsum boards. Prime frist with Eucocolle diluted 1:3 with water.

 

Package

5,4 & 20 kg.

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCO TOP PUTTY.pdf

EUCOPRIME

 

Description 

EUCOPRIME is a water based acrylic primer designed specifically for use on masonry surfaces of all types, wood, gypsum.

This product protects surfaces by forming a clear membrane which will prevent moisture penetration.

 

Properties     

1-Seals out dirt and other staining materials.

2-Compatible with any emulsion paint and any emulsion adhesive.

3- Prevents moisture penetration and is not affected by weathering conditions.

4- Is applied on gypsum blocks and masonry to seal pores and decrease painting consumption.

       

 

Application 

1- Dilute EUCOPRIME 1:5 by volume with water, stir well until it becomes white in colour.

2- Apply on surface immediately with brush, roller or spray.

3- Drying time 12 to 24 hrs. before using other paints.

 

Consumption

15 to 25 m2/kg after dilution.

Shelf life         two years.

 

Package

5 kg, 20 kg drums.

 

 

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCOPRIME.pdf

EUCOROL F

Description          

It is an acrylic water base anti fungus coating .

                              

Properties            

1-It is used in factories, warehouses, rooms where anti fungus coating is needed .

2-Good adhesion to different surfaces .

3-Good weathering resistance.

4-Good alkali resistance (washable) .

5-Could be applied on all types of surfaces as concrete, plaster, bricks and on other water emulsion paints.

6-Concentrate and could be diluted up to 25% .

7-Covers cracks up to 1 mm.

8-Protects surfaces against friction  corrosion, erosion, and humidity.

9-Resists all weather conditions .

10-Provides the substrate protection against fungi and bacteria .

11-Is not affected by diluted acid and alkalis, salts, sugars, oil, and grease.

Kinds of fungi  and bacteria which is resisted by Eucorol F:-

Achromobacter Sp.                        Aspergillus Sp.            

 Aeromonas Sp.                              Botrytis Sp.

Alcaligenes Sp.                              Candida Sp. (Yeast)

Bacillus Sp.                                    Paecilmyes Sp.

Escherichia Sp.                              Pencillium Sp.

Flavobacterium Sp.                       Rhodotorula Sp. (Yeast)

Klebsiella Sp.

Proteus Sp.

Pseudomonas Sp.

Consumption 

from 6 to 8m2/kg according to surface porosity

Shelf life at 20oC                         12 months

Packing 

1 kg , 5 kg, 20 kg .

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCOROL F.pdf

EUCOROL

HIGH QUALITY ACRYLIC PAINT MULTI PURPOSE

 

Description

EUCOROLL is new with a performance standard for pure acrylic water base maintenance system .

 

Properties      

-Good adhesion to different surfaces .

-Can be applied to exterior and interior surfaces .

-Good weathering resistance .

-Good alkali resistance ( washable )

-Having internal plasticized acrylic polymer , it allows the formulation of elastomeric systems .

 

Technical data       

Finish                                                  Semi matt

Base                                                    100%acrylicemultion

Solid by volume                                  48.3 % ( approx. )

Solid by weight                                   61 % ( approx. )

Theoretical spreading rate                  7.2 m2 / kg ( 50 microns dry )

Specific gravity                                   1.34 gm / cm3

Dry film thickness                              50 microns

Wet film thickness                              103 microns

Recommended dry film                      150 microns

Thinner                                                Tap water 

Drying time

-Surface                                               0.5 hr (  at 25 °C , 60 % R.H. )

-Full cured                                          7 days (  at 25 °C , 60 % R.H. )

Recoat interval

-Min.                                                   2 hrs (  at 25 °C , 60 % R.H. )

-Max.                                                   No limitation

Shelf life                                             12 months at normal condition in original containers

Application methods                           Brush and rollers

Volume of thinner                                0 - 10 %

 

Mode of application        

It must be stirred thoroughly before use . The method of application depends on type of surface .

1-Porous surfaces new, old, untreated walls and ceilings should be primed with diluted EUCOROLL then it is reduced to the normal  

brushing or roller consistency to be applied as top coat .

2-Non porous surfaces like old walls and wood which have previously been painted should first be washed with a solution of ammonia and then paint with EUCOROLL reduced to the normal consistency .

 

N.B.               

Brush and roller should be cleaned thoroughly in pure      water immediately upon application, as dry EUCOROLL is difficult to dissolve.

 

Package         

1 kg, 5 kg, 25 kg, or 30 kg drums.

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCOROL.pdf

EUCOSMOOTH

READY TO USE PLASTERING

 

Description    

EUCOSMOOTH is a ready to use plastering based on treated gypsum with a slow setting  time, keeps the mixing water for a while . Which gives enough time for good  finishing and smoothing .

 

Advantages

1-EUCOSMOOTH is produced specially for plastering on smooth surfaces like fare face concrete without special preparation or chipping the concrete surface.

2-Very good adhesion to the concrete or masonry without any primers.

3-EUCOSMOOTH gives a very smooth surface  which can be considered a finished surface without painting.

4-EUCOSMOOTH forms a light weight layer but very hard and strong.

5-Successfully fills in cracks or honey comb if it exists on the concrete surface.

6-EUCOSMOOTH is economic in consumption.

Technical data  

Hardening time                       50-60 min.

Chloride content                     nil

Colour                                     off White

Mixing with water                  1 water : 3 EUCOSMOOTH

Shelf life                                 one year

 

Consumption

Thickness                                Consumption

1 mm                                       1 kg/m2

5 mms                                      4-5 kg/m2

30 mms                                    25-30 kg/m2

 

Application   

1- Surface must be clean free of dirties, dust, oils, or grease.

2-Add water to EUCOSMOOTH until mortar is ready with thixotropic consistency.

3- Apply EUCOSMOOTH one layer.

Up to 30 mms. thickness to the surface.

 

Package         

Bags 30 kg.

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCOSMOOTH.pdf

 

EUCOTEX

VINYL TILES ADHESIVE

Description    

Non toxic adhesive formulated to meet the high class specifications, easily applied even on vertical surfaces.

The filling effect of the adhesive makes it most suitable for bonding on uneven substrata; the tacky and additive contents improve the adhesion power at low and high temperatures.

The product can be used either on new or old floors without any other preliminary treatment than ordinary cleaning.

EUCOTEX    can be used on concrete, cement tiles, wood and parquet flooring.

 

Advantages   

- Keeps tiles effectively in place during life time.

- Ready mixed; easy to use.

- No priming or other preliminary treatment necessary.

- Can be used for new and old floors.

- Bonds to variety of materials.

- High coverage-economic in use.

- Water resistant when cured.

 

Floor preparation             

The surface must be clean dry and free from dust, dirt,oil or grease and loose materials, remove dust and friable materials with stiff brush, remove oil or grease with a suitable detergent .Very porous sub floors should be primed with adhesive solution turpentine.

 

Application   

Apply EUCOTEX using a notched trowel with 1.5-2.5 mm, deep triangular notches at 5 mm centers. The flooring material normally placed during the wet adhesive waiting time of 5-15 minutes. press the P.V.C. tiles firmly onto the adhesive and roll in both directions with a heavy roller to ensure adequate contact, transfer of adhesive and elimination of air pockets.

Remove surplus adhesive with a damp cloth or sponge.

Installing sheet vinyl tiles on non porous surfaces:-Leave the adhesive (after applying as above) for 20 to 30 minutes fixing flooring material until it has become very tacky to the touch. Then proceed as before, position tiles or sheet with care. Adhesive will remain, pressure sensitive for 4 hours.

 

Consumption

From 3-4 m2/kg depending on porosity of the surface.

 

Package         

Drums containing 20 kg

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

EUCOTEX.pdf

ISOCOAT F

Water proofing and anti fungus paint

Description    

An elastomeric, water proofing anti fungus paints.

 

Advantages   

1-It is used in factories, warehouses, rooms …etc. where anti fungus and anti bacterial paints is needed.

2-Protects buildings from weather conditions all year long .

3-Due to its elasticity, it can withstand elongation up to five times the original applied length which allows It to cover building cracks up to 2mm crack with.

4-The dry paints is not affected by bacteria or fungi in humid areas.

5-Applicable on different kinds of surfaces like woods, concrete, bricks,….etc.

6-It not affected with ultra violet rays.

7-It is a water proofing paint and resins table to diluted acids, alkalis, salts and sea water.

 

Technical date                     

Density                                                1.3-1.32

min drying temp Temperature            oC 5

Shelf life at 20oC                               12 months

 

Coverage       

1 kg for 2-4 square meters according to the surface nature , number of  coatings and rate of dilution .

Temperature Resistance                      -10 to +100 

 

Packing                     

1 kg , 5 kg, 5 kg.

 

Application   

1- Stir well before use.

2- The surface must be clean and free of dust, dirt, grease or oil .

3- Dilute ISOCOAT F by 50% water for the first coat .

4- Apply the second coat with 10% water dilution or without .

5- Apply the third coat without dilution in case of  pores Surface 

 

Kinds of fungi  and bacteria which is resisted by ISOCOAT F:

Achromobacter Sp.                 Aspergillus Sp.

Aeromonas Sp.                       Botrytis Sp.

Alcaligenes Sp.                      Candida Sp. (Yeast)

Bacillus Sp.                            Paecilmyes Sp.

Escherichia Sp.                       Pencillium Sp.

Flavobacterium Sp.                Rhodotorula Sp. (Yeast)

Klebsiella Sp.

Proteus Sp.

Pseudomonas Sp.

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

ISOCOAT F.pdf

Plasto Matt

Interior Emulsion Paint

Description    

Plasto Matt is a plastic emulsion matt paint. anti rub, alkali resistant and non yellowing paint.

 

Field s of Application: 

Plasto Matt is used for interior uses, on old as well as new plaster and concrete, and also as a primer for wall paper.

 

Technical Data:

Finish 

Flat

Solids by volume

42% (approx)

Solids by weight

61%

Theoretical Spreading rate

5.5 m²/kg (50 m dry)

Dry film thickness

50   Microns.

Wet film thickness

120 Microns.

Recommended D.F.T

150 Microns.

Specific gravity

1.5 gm/cm³

Thinner

Tap water.

Drying time

 

Surface

0.5 hr (at 25 oC. 60% R.H)

Full cured

7 days (at 25 oC. 60% R.H)

Recoat interval

 

Min

1-2 hrs (at 25 oC. 60% R.H)

Max

No limitation

Shelf life

Up to 1 year.

Application method

By Brush and roller

Volume of thinner

0-10%.

Packing

20 Kg.

Mode of:Application            

Plasto Matt must be stirred thoroughly before use the method of application depends on type of surface:

1- Porous surfaces like new, old untreated walls, and ceilings , should be primed with diluted Plasto Matt then it is reduced to normal brushing or roller consistency to be applied as top coat.

2- Non porous surfaces like old walls and wood which have previously been painted should first be washed with a solution of ammonia and then painted with Plasto Matt reduced to the normal consistency.

N.B Brush and roller should be cleaned thoroughly in pure water immediately upon application. As dry Plasto Matt is difficult to dissolve.

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

Plasto Matt.pdf

SEALAR

NON-YELLOWING ACRYLIC SEALER

FOR ARCHITECTURAL CONCRETE

Description    

Is a high performance, acrylic SEALAR designed specifically for architectural concrete applications where a non-yellowing, ultra-violet resistant membrane is required. A clear, wear resistant material , will seal concrete surfaces and prevent absorption of water. salts and airborne contaminants.

 

Properties      

-Provides a totally clear membrane for sealing concrete surfaces.

-Good resistance to traffic, abrasion, and select low concentration chemicals.

-Compatible for application over most curing compounds.

-Reduces cleaning and maintenance costs.

-Rust-proof by impregnating surface pores with a tough, durable resin.

-Will not yellow under ultra-violet exposure.

-Good for interior or exterior application.

-Fast drying, easy to apply.

-Formulated with a high flash point solvent for safer storage and shipping.

Typical application              

- Exposed aggregate concrete.

- Walls and columns.

- Exterior paintings.

- Architectural concrete.

 

Surface preparation

Surfaces to be treated should be clean, dry and free of dirt , oil, grease  loose    scale or other contaminants which may adversely affect adhesion.

 

Application

Use directly, from container. No mixing is required should be applied using a short nap roller, brush or sprayer. Apply in a uniform-manner avoid puddle and excessive overspray to insure an even application. Badly worn and porous areas may require additional applications to attain a uniform seal and surface gloss. When applying to walls and columns, care should be taken to avoid streaking and runs.

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

SEALAR.pdf

SUPER TEX

Acrylic Plastic Paint

Description    

It is very durable semi matt plastic emulsion paint for exterior and interior uses SUPER TEX has been formulated for exterior applications on old as well as fresh plaster, concrete, wood and masonry to give the following properties:

-Good adhesion to different surfaces.

-Good weathering resistance.

-Good alkali resistant (washable).

-Excellent durability.

 

Technical date          

-Finish                                                 :semi matt.

-Base                                                   :100% acrylic emulsion

-Colour                                                :as the customer required emulsion   

-Solid by volume                                 :35%                       

-Solid by weight                                 :52%                       

-Theoretical spreading rate                 :6.5 m2/kg (40 mic.dry)                     

-Specific gravity                                 :1.32 gm/cm3                     

-Dry film thickness                             :40 microns                       

-Wet film thickness                             :115 microns                       

-Recommended dry film thickness     :120 microns                       

-Thinner                                              :Tap water                       

-Drying time                                                 

Surface                  :20 min. (at 25ºC, 60% R.H)                       

Full cured              :7 days .(at 25ºC, 60% R.H)

Recoat interval                       

Min.                      :1-2 hrs . (at 25ºC, 60% R.H)                       

Max                      :No limitations.                       

Shelf life              :12 months at normal conditions

in original containers.

Application methods

Brush and roller . 

Volume of thinner                               :0-10 %

 

Mode of applications           

Supertex must be stirred thoroughly before use the method of application depend on the type of the surface:

1-Porous surface like new, old, non treated walls and ceilings should be primed with diluted supertex then it is applied by the normal brush or roller as top coat.

2-Non porous surfaces like old walls and wood which have previously been painted with an oil paint shoul first be washed with a solution of ammomia and then painted with supertex.

 

N.B 

Brush and roller should be cleaned thoroughly with pure wate immediately upon applications as the dry supertex is difficult to dissolve.

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

SUPER TEX.pdf

TRAFFIC PAINT

Formulated to match U.S.A., Egyptian specifications, and requirements II- P-115 D W.S.A. According to the Egyptian, standard No. 794/1995 and Federal specifications. It is a ready mixed pigmented synthetic resin suitable for use on Portland cement, bitumen, pavement for runways, highways, streets, bridges, tunnels, etc., It is a fast drying traffic paint.

 

Advantages   

Good adhesion, waterproof, weathering resistance.

Technical Data

Colour match                 White – yellow -black

Pigment %by wt.                             50-53                       

No volatile % by Wt. of binder       31 min.                       

Weight per lit.                                  1.43 ± 0.1                       

Drying (no Pick up) mins at 25o C       25max.                       

Dry opacity-white not less than             0.86                                         

Yellow not less than                              0.90                       

Uncombined water   not over         1 % by wt.                       

Particles retained on 325 sieve                       

not over                                           1 % by wt.                        

Consistency                                    70-80 Kw.                       

Grind                                       not under 3 micron                       

Directional reflectance           not less than 6 months                       

Thinner                            Euxit 501 or universal Thinner.

 Shelf life ( month)at 25o C                     12                       

Thinner                          Up to 15 % by volume                       

Spreading rate for DFT 100 mic.         5m2/kg                        

Sold by volume                                       50%

 

Package         

20 –30- 200 Kgs

 

 

Your web browser doesn't have a PDF plugin. Instead you can download it by clicking the file below

TRAFFIC PAINT.pdf